Klarity White™ Thermoplastic Splinting Material can be used to make a variety of orthoses, providing firm to lightweight support from the hand to the foot, and is similar to Aquaplast™. Klarity White™ has 100% memory and turns transparent when completely heated.
Memory 100% memory. Klarity White™ easily returns to its original shape and size when reheated.
RTS Minimal to moderate resistance to stretch. Can be used for single-surface splinting or stretched circumferentially.
Drape Maximum drape. Excellent conformability and detail reproduction. Turns transparent when completely heated and retains its clarity for the first few minutes of molding, allowing visibility of landmarks and bony prominences.
Rigidity Moderately rigid splints. If a more flexible splint is required, simply stretch the material to achieve the desired rigidity and thickness.
Surface Finish Resists fingerprints for a smooth, shiny surface. To remove marks and bring out shine, dip in warm water or lightly heat the surface with dry heat.
Latex Free Skin friendly and non-irritating. Can be disposed of with normal waste and will biodegrade over time.
Klarity White™ (coated)
Half Sheets are 18x24in (460x610mm). Full Sheets are 24x36in (920x610mm)
R-1600A Klarity White™ 1.6mm Half Sheet
R-3200A Klarity White™ 3.2mm Half Sheet
R-3200 Klarity White™ 3.2mm Full Sheet
R-4000 Klarity White™ 4.0mm Full Sheet
R-3201A Klarity White™ 3.2mm Half Sheet
R-3201 Klarity White™ 3.2mm Full Sheet
R-2436A Klarity White™ 2.4mm Half Sheet
R-2436 Klarity White™ 2.4mm Full Sheet
R-3242A Klarity White™ 3.2mm Half Sheet
R-3242 Klarity White™ 3.2mm Full Sheet
Heating and Working Time
Optimum Temperature: 160˚F (70˚C)
Heat in a dry-heat oven or in a waterbath at 160˚F (70˚C) for 1-2 minutes. Klarity White™ turns transparent when material is fully heated and ready to use.
The material normally sets in 3-4 minutes, with a working time of 1-2 minutes, depending on thickness.
Klarity White™ can be reheated and remolded as often as needed, and will retain 100% memory.
Klarity White™ Applications
2.4mm Use for hand and wrist splints, arthritis splints, circumferential splints and burn splints. It is also ideal as a base for smaller dynamic outriggers.