Electric Tilt Table

1.1 External dimensions (1900 * 800 * 575 ± 20mm):
1.2 Bed surface dimensions (1775 * 520 ± 20mm):
1.3 Foot support plate size (490 * 310 ± 20mm):
2. Materials and craftsmanship
2.1 The bed body is made of high-quality cold-rolled steel material.
2.2 The foot support board component is composed of an iron frame and a soft wrapped wooden board, which is composed of sponge and artificial leather wrapped wooden boards.
3. Performance indicators
3.1 Maximum thrust of electric push rod: ≥ 8000N
3.2 Number of electric push rods: 1. Number of manual rocker rods: 1
3.3 The electric push rod adopts a slow speed push rod, with a slow standing speed.
3.4 The running time of the bed board from horizontal to upright position should not be less than 30 seconds
3.5 Controller: Using a jog control switch and a manual controller to control the system and adjust the bed angle
3.6 Adjustable standing angle range: 0 ° -80 ° ± 5 °
3.7 Manual back up adjustable angle range: 0 ° -65 ° ± 10 °
3.8 Emergency stop function: a device for controlling the patient’s bed stop function
3.9 Number of guardrails: 2, using 5-level folding aluminum alloy guardrails
3.10 Number of casters: 4, using single body brakes
3.11 Number of upper limb trainers: 1
3.12 Quantity of fixed straps: 4 fixed straps, using fast pasting mode, can be locked tightly after pasting, and can be disassembled and moved after loosening.

3.13 Number of foot support plates: 1 adjustable foot support plate
3.14 Number of training tables: 1
3.15 Power supply:~220V 50Hz 3.16 Power: ≤ 400VA
3.17 Fuses: 4A/250V
3.18 Noise: ≤ 60dB (A)
3.19 Maximum load capacity: 200 Kg.